LoMo M1 Lowering Module Quick Connect Harness

Direct plug and play harness for the M1 Lowering Module.

The QuickConnect harness decreases your install time from half-day to less than an hour. Tired of pulling pins? NO LONGER - as you don't have to do it. Connect your factory connector to the QuickConnect harness and your harness to the LoMo M1 lowering module - and you're done. Note - This harness is for the LoMo M1 Lowering Module ONLY. This will not work on our V2 or V3 units.

Please click here, or call 480-596-0500 for shipping info

LoMo M1 Lowering Module

The ultimate lowering module solution is finally released! The LoMo M1 does away with laptops, no more driver issues, no flat screen panels, and no remote controls. The M1 controls all functions directly through the instrument cluster. You have total control of your ride height at any time. Total integration into the CAN-BUS system of the vehicle means you can change the height or turn on/ off the module at anytime. Works on all ABC and AIRMATIC cars except 2003 R230 SL and W220 / W215 S and CL class.

A majority of factory Mercedes-Benz are equipped with electronically controlled airmatic suspension systems called ABC (Active Body Control). When increasing horsepower beyond the factory limits it becomes a necessity to also increase the handling dynamics of the vehicle. Installing a lowering module will allow you to fine tune the cars factory suspension settings, a lower ride height will improve handling and assist in putting down increase horsepower.

This lowering module will allow you to adjust the cars ride height by 1/8” increments up to -2.0” lower for a custom tailored look! In addition you can independently adjust the front and rear ride height to your desired cosmetic preference.

Why would I want to lower my car and have problems with steep curbs or driveways you might ask? This lowering module retains the factory raise button on the dashboard allowing for a quick solution around road hazards.

Key features:

-Complete integration in the CAN network - just like factory!
-No power consumption when car is off with our power down and wakeup capability
-Self-diagnosis
-Error Management
-Setting the ride height with the steering wheel buttons (front and rear axle independently )
-Returns to factory ride height at highway speeds
-Key-related activation 
-No soldering required.
*Automatic detection of trailers - for those with  SUV's the module will shut off when a trailer is connected.
-Can be easily turned on or off via the steering wheel buttons

Please click here, or call 480-596-0500 for shipping info