3” Exhaust with 4” Tip. (All WRX & STi 2002-2007) APSWRX-HOE/R1

This Turbo-Back 3 Inch Stainless Steel exhaust system with a 4.0 inch tip produces high outright power with stronger mid range torque than fabricated turbine outlet style exhausts. All this with improved turbo response (less lag) when running large turbochargers and maximum durability. Careful attention has been paid to exhaust noise and note without compromising outright performance. A strong but subdued exhaust note with no drone at highway cruise and well matched to the dynamics of the WRX. Complete with every nut, bolt and gasket!

Note: APS has discontinued manufacturing of this product. Quantities are limited.

Please click here, or call 480-596-0500 for shipping info

3.5” Race Exhaust. (All WRX & STi 2002-2007) APSWRX-HOE/R5

"The worlds first 3.5"" Turbo-Back Stainless Steel race exhaust system with a 4.5” tip is designed for 600+ horsepower. Minimal exhaust back pressure, fast turbocharger spool-up and maximum horsepower is guaranteed. This is a true 3.5"" internal diameter mandrel bent exhaust system through each and every section. This system allows optimum exhaust gas flow with minimum exhaust back pressure. Complete with every nut, bolt and gasket! (*No Catalyst: FOR OFF-ROAD RACE USE ONLY)"

Note: APS has discontinued manufacturing of this product. Quantities are limited.

Please click here, or call 480-596-0500 for shipping info

High Flow Catalyst (All WRX & STi 2002-2007) APS 995-019-200

APS has gone to great lengths to custom design the highest quality catalytic converter on the market. With true 3 inch inlet/outlet connections, it features a high flowing stainless steel monolith packed in stainless steel mesh. No other aftermarket converter (and few O.E.M. pieces) are constructed to such a high specification level. (*For use with APS Exhaust Systems Only)

Note: APS has discontinued manufacturing of this product. Quantities are limited.

Please click here, or call 480-596-0500 for shipping info

APS Up-Pipe: (All WRX and STI and Forester-XT) APSWRX-TIP/02

The APS High Energy Turbine Inlet (Up) Pipe is a complete bolt-on assembly including 321 stainless steel up-pipe and a truly innovative Double Wall 321 stainless steel flex coupling that incorporates an internal 321 stainless steel Endurance flow tube.

Note: APS has discontinued manufacturing of this product. Quantities are limited.

Please click here, or call 480-596-0500 for shipping info

Dyno-Comp Equal Length Header ONLY (Does not Include Up-Pipe)

Dyno-Comp has re-designed and manufactured what is arguably the ultimate STI header system on the planet. Designed specifically for high powered STI engines, the Dyno-Comp Equal Length Split Pulse Header system delivers an outstanding improvement in power and torque, particularly in the mid RPM range. This ""No Cat"" system ensures optimum exhaust gas speed which in turn is transfers the greatest amount of thermal energy to the turbocharger for even greater horsepower and crisp throttle response.

Please click here, or call 480-596-0500 for shipping info

Up-Pipe for use with APS Equal Length Header: APSSTI-TIP/07

The APS High Energy Turbine Inlet (Up) Pipe is a complete bolt-on assembly designed for high horsepower applications when used in combination with the APS equal length split pulse header system. Precision crafted in 321 stainless steel the APS high energy up-pipe includes a truly innovative Double Wall 321 stainless steel flex coupling that incorporates an internal 321 stainless steel Endurance flow tube for smooth flow and bullet-proof performance.

Note: APS has discontinued manufacturing of this product. Quantities are limited.

Please click here, or call 480-596-0500 for shipping info

Tomei Equal Length Header (EJ20/25) ALL: 193105

Tomei EJ20/EJ25 Equal Length Exhaust Header (includes Up-Pipe). Tomei is know for unsurpassed quality and workmanship. Header also includes all gaskets, hardware and even header wrap.
Dyno-Comp has seen gains of +15 WHP !!!

Please click here, or call 480-596-0500 for shipping info

Tomei Un-Equal Header (EJ20/25) ALL: 193082

This Tomei EJ20/EJ25 exhaust header offers the biggest bang for the buck.
Includes up-pipe, all gaskets, hardware and even header wrap.  Tomei is know for unsurpassed quality and workmanship.  Dyno-Comp has used this header on many of our high 400+ whp "Viper Killer" packages.

Please click here, or call 480-596-0500 for shipping info

Cobb Tuning SS 3" Downpipe 04-07

The COBB Tuning downpipe is available in a "Street" version that comes with a single high flow catalytic converter. A downpipe combined with the performance tuning found in the AccessPORT is the first step to any enthusiast looking to unlock the potential of their engine, while still maintaining a stock look around their vehicle.

Please click here, or call 480-596-0500 for shipping info

Titek: Down-Pipe (2002-07) WRX/STI

TiTek Innovations fully polished stainless steel downpipe for the 02-06 WRX / STI.  The downpipe utilizes our smooth bellmouth transitioning to our full 3” mandrel bent finishing. This downpipe will help increase horsepower by maximizing exhaust flow efficiency. This item is an easy bolt-on upgrade for stock and upgrade turbochargers for horsepower gains.  Includes all necessary hardware (gaskets, nuts, bolts). Developed For Offroad Use Only.

Limited Stock (2):  While supplies last. 

Please click here, or call 480-596-0500 for shipping info

Kartboy 12mm/15mm Pink Exhaust Hanger [KAR KB-011-PINK]

The Kartboy Hangman Exhaust Hangers are a direct replacement for the stock pieces on all Subaru vehicles built in the recent past. The benefits of this modification are reduced swaying of both stock and after market exhaust systems, and a longer life vs. natural rubber. These pieces were computer designed and analyzed to allow minimum movement, while retaining the stock packaging requirements. This product may fit other brands of vehicles, but it is not intended to, so purchase with caution in this situation. These hangers fit the 05+ Subaru Legacy.

PLEASE NOTE, THIS IS FOR A SINGLE (1) EXHAUST HANGER. THE PICTURE IS JUST A REFERENCE FOR COLOR.

These are 15mm hangers, but also available in 12mm.

Please click here, or call 480-596-0500 for shipping info

Kartboy Impreza Exhaust Hanger (1) [KB KB-011]

The Kartboy Hangman Exhaust Hangers are a direct replacement for the stock pieces on all Subaru vehicles built in the recent past. The benefits of this modification are reduced swaying of both stock and after market exhaust systems, and a longer life vs. natural rubber. These pieces were computer designed and analyzed to allow minimum movement, while retaining the stock packaging requirements.
Price is for a 1 hanger. Available black only.

Please click here, or call 480-596-0500 for shipping info

Kartboy Long Hanger LGT/ 2008-2010 Impreza [KAR KB-011-LEG-LONG]

The Kartboy Hangman Exhaust Hangers are a direct replacement for the stock pieces on all Subaru vehicles built in the recent past. The benefits of this modification are reduced swaying of both stock and after market exhaust systems, and a longer life vs. natural rubber. These pieces were computer designed and analyzed to allow minimum movement, while retaining the stock packaging requirements.

Price is for a 1 hanger. Available black only.

2005 Legacy GT, and 2008-2010 Impreza model specific.

Please click here, or call 480-596-0500 for shipping info

Kartboy WRX STI Extra Long Exhaust Hanger (1) [KB KB-011-LONG]

The Kartboy Hangman Exhaust Hangers are a direct replacement for the stock pieces on all Subaru vehicles built in the recent past. The benefits of this modification are reduced swaying of both stock and after market exhaust systems, and a longer life vs. natural rubber. These pieces were computer designed and analyzed to allow minimum movement, while retaining the stock packaging requirements.
Price is for 1 hanger. Available in black only.

Please click here, or call 480-596-0500 for shipping info

Invidia Catted Downpipe

Invidia's down pipes are full stainless steal for a great finish and long lasting durability, CNC machined flanges and robot TIG welding complete this incredible design. The Invidia down pipes are direct replacement for your rides first catalectic converter. Less restriction equals more free flowing horsepower and torque which translates into faster turbo spool.
*When used with the factory cat-back exhaust system, this down-pipe has been tested on Dyno-Comp's in house AWD dyno and typical gains are:
+20 HP
+25TQ

Please click here, or call 480-596-0500 for shipping info

Invidia Q300 STAINLESS STEEL ROLLED TIP CAT-BACK

SUBARU 02-07 WRX/STI Q300 STAINLESS STEEL ROLLED TIP CAT-BACK

Item No.:HS02SW1G3S

Piping Dia.:76mm

Tip Dia.:101mm

Please click here, or call 480-596-0500 for shipping info

Dyno-Comp Subaru Exhaust Adapter

Unlike other adapters our flange was created thicker to help withstand the extreme heat and prevent warping. This adapter will make for a straight bolt on system. The kit uses factory hardware however additional hardware kit is available for purchase... 

Additional parts available for purchase... Bolts, springs, and nuts.

Please click here, or call 480-596-0500 for shipping info

Dyno-Comp Subaru Exhaust Adapter Hardware Kit

Springbolt hardware kit for the Dyno-Comp exhaust adapter. This kit includes the bolts, springs, and nuts.

Please click here, or call 480-596-0500 for shipping info