(480) 596-0500
The shop’s Subaru WRX STI in Dyno-Comp colors, front three-quarter, on the showroom floor

Dyno tuning.

  • Arizona’s original AWD dyno
  • Load-bearing, 2WD and AWD
  • Rated to 2,000 whp

It holds any load, at any rpm, for as long as the tune needs.

Electromagnetic retarders apply any load from zero to 100 percent, so the dyno reproduces real driving at any rpm, speed or gear.

The car is tuned at part throttle, at cruise and on boost, as well as at full throttle.

The tail of a Mercedes-AMG coupe strapped down on the dyno, its lamps lit
Type
Eddy-current, load-bearing chassis dyno
Drive
2WD and AWD, with controlled front-to-rear load split
Rollers
8.5-inch knurled double rollers under each tire
Capacity
2,000 wheel horsepower
Load control
Zero to 100 percent at any rpm, speed or gear
Logged live
Power, torque, tractive effort, air-fuel ratio, boost, exhaust gas and intercooler temperatures
The room
Enclosed and temperature-controlled, with a 60+ mph cooling airflow

Check in, baseline, calibrate, verify.

A red Porsche 911 Turbo S on the dyno rollers with a tuner in the driver’s seat

Check in

We go through your mods list, fuel and goals, and set the car on the rollers.

The wheel of the Porsche between the dyno rollers

Baseline pulls

Repeatable pulls under controlled load give a starting figure for power and torque.

A tuning laptop inside the Porsche during the session

Calibrate under load

We hold the engine at fixed rpm and load to tune fueling, timing and boost control across the map.

A laptop showing the tuning log

Verify and hand back

Final pulls, a dyno sheet, and a walk through what changed and what to watch.

Customer cars, measured at the wheels.

1,045.7whp

841.8 lb-ft at the wheels

2017 Chevrolet Camaro SSSleeved 427 stroker, ProCharger F1A-94

The dyno sheet for the 2017 Camaro SS: 1,045.7 horsepower and 841.8 pound-feet at the wheels The dyno sheet for the 2018 Mustang GT: 1,034.2 horsepower and 834.7 pound-feet at the wheels The dyno sheet for the 2018 Camaro ZL1: 1,032.0 horsepower and 1,053.2 pound-feet at the wheels The dyno sheet for the 2019 Corvette Z06: 805.2 horsepower and 709.3 pound-feet at the wheels The dyno sheet for the 2018 Mercedes-AMG E63 S: 737.1 horsepower and 883.0 pound-feet at the wheels

The shop’s own dyno sheets, shown dark; select the sheet to see the original. The bar is each car against the dyno’s 2,000 whp capacity. Your result depends on your parts, fuel and car.

A silver Mazda RX-7 on the dyno rollers, seen from the front quarter

Bring the fuel, the mods list and a healthy car.

  • A full tank of the fuel you will run every day: pump 91, E85 or race fuel
  • A written list of modifications and any previous tune file
  • Tires in good condition and at the correct pressure
  • Any check-engine codes or symptoms you have noticed
  • Any handheld tuner or Accessport you already own

Pricing depends on the session, the platform and software, your parts and your fuel. Send us the setup and we confirm the price before the car goes on the rollers.

The dyno is in the Scottsdale Airpark, a short drive from Phoenix and the rest of the Valley. Sessions are by appointment.