(480) 596-0500
A built inline-six hanging from a hoist beside an orange Skyline

Performance engine builds, proven on the dyno

Forged pistons, rods, cams and heads specified for your power target, assembled in-house, then broken in and tuned on our AWD dyno. Performance builds, not stock rebuilds.

  • Forged internals
  • Strokers
  • Heads and cams
  • Turbo and blower ready
  • Dyno-tested

Start a build plan(480) 596-0500

When stock internals become the limit

Every factory engine has a ceiling. Past it, more boost or timing just finds the weakest part. A built engine moves that ceiling and lets the tune use it.

  • More power and torque: forged pistons, upgraded camshafts and strengthened internals support far higher output.
  • Reliability under stress: built to take higher boost, track sessions and sustained load.
  • Matched to the car: the engine, fuel system, turbo or blower and tune specified together.

Two of the sheets on our results page come from sleeved 427 stroker LS builds: 1,045.7 whp with a ProCharger F1A-94 and 1,032.0 whp / 1,053.2 lb-ft with a 2.9L Whipple.

Evaluate, plan, build, prove

  1. Evaluate

    We look at your current setup, how you use the car and the power you want.

  2. Plan and quote

    Parts list, machine work, fabrication, labor and a timeline, in writing, before work starts.

  3. Build

    Quality components assembled with care, plus any intake, exhaust, turbo or blower brackets we fabricate to match.

  4. Dyno-test

    Break-in and tuning on our AWD dyno so the engine makes what it was built to make.

Timelines depend on complexity, parts availability and the fabrication involved. We keep you updated through the build.

Stroker builds on our dyno

Carwhplb-ft
2017 Chevrolet Camaro SSSleeved 427 stroker, ProCharger F1A-941,045.7841.8
2018 Ford Mustang GTTwin-turbo kit, Fore triple pump, ID1300 injectors1,034.2834.7
2018 Chevrolet Camaro ZL1Sleeved 427 stroker, 2.9L Whipple1,032.01,053.2
2019 Chevrolet Corvette Z06Full bolt-ons, heads, cam, ported blower805.2709.3
2018 Mercedes-AMG E63 SECU, TCU and CPC tune, downpipes, fuel pump, intake737.1883.0

Dyno results

Engine and drivetrain parts we install

  • Katech
  • Brian Tooley Racing
  • Texas Speed & Performance
  • Project Gamma
  • Circle D Transmission
  • IAG Performance
  • AMS Performance
  • Whipple Superchargers
  • Magnuson Superchargers
  • Holley

Owners on their builds

★★★★★

“Great communication was able to get us on the dyno quickly would highly recommend dynocomp for any and all repairs dyno ect great experience”
denis beganovicGoogle review, August 2026

★★★★★

“The team at Dyno comp was great! They walked me through their whole facility showed me a number of projects they’re working on. They were very informative. Explained the whole process to me, and very happy with the results.”
scott franksonGoogle review, August 2026

★★★★★

“Great first experience with dyno-comp. Got my tundra dialed in and it runs great. Thank you Joe and the techs that worked on it.”
bronson chambrelloGoogle review, July 2026

Engine build questions

How long does a performance engine build take?

It depends on the scope, machine work and parts availability. You get a written timeline with the build plan and updates as it progresses.

Do you rebuild stock engines?

Our focus is performance builds for boost, track and high-power street cars. For a stock replacement or machine-shop-only work, call us and we'll tell you if it's a fit.

Is the engine dyno-tested?

Yes. Every build is broken in and tuned on our AWD chassis dyno before it goes home.

Can you build an engine around a supercharger or turbo kit?

Yes. Planning the engine, the kit, the fuel system and the tune together is the most reliable way to make big power.

What are you building?

Tell us the car, the engine and the power target. We'll set up an evaluation.

Call (480) 596-0500