Acura NSX and Type S tuning
Acura's performance cars range from the original mid-engine NSX to today's turbo Integra Type S and TLX Type S. They share Honda engines and Honda's software question, which we answer car by car.
- NSX (first generation)
- NSX (hybrid)
- Integra Type S
- TLX Type S
- RSX Type-S
- Integra Type R (classic)
Two very different cars
The first-generation NSX (1991–2005) has a naturally aspirated V6 behind the driver. Owners want it healthy and sounding right more than they want a tune: exhaust, a baseline dyno pull, brakes, suspension and an alignment, and a car kept indoors while it's here.
The second-generation NSX is a twin-turbo V6 hybrid with electric front motors and all-wheel drive. Ask us before booking; brakes, wheels, tires and alignment are straightforward, the hybrid system is a conversation.
Turbo Acuras
The Integra Type S shares the 2.0 turbo K20C with the Civic Type R; the TLX Type S and MDX Type S use a 3.0 turbo V6 with SH-AWD. Both respond to intake, intercooler and exhaust work, and to calibration where Honda-family software supports the control unit. We confirm from the VIN before quoting.
The RSX Type-S and classic Integras are naturally aspirated K and B engines: exhaust, intake, baseline pulls and swaps on aftermarket management.
Mid-engine, front-drive or SH-AWD
A first-generation NSX runs on the rear rollers, an Integra on the front, each driven tire between two 8.5-inch rollers, usually with no straps. SH-AWD Acuras run on our AWD dyno with front and rear load controlled, so the torque-vectoring rear axle isn't confused.
- Exhaust, catalogue or stainless built in-house
- Coilovers and alignment
- Brakes, pads and fluid
- Indoor storage with 24/7 recording
- Maintenance and diagnostics
Acura questions
Do you work on first-generation NSXs?
Yes: exhaust, baseline dyno pulls, brakes, suspension, alignment and service, with the car stored indoors.
Can you tune an Integra Type S?
Where Honda-family software supports its control unit, yes. Send us the VIN.
Is my TLX Type S OK on your dyno?
Yes. SH-AWD cars run on our AWD dyno with front and rear load controlled.