Stainless exhausts and intercooler piping, built in-house
Dyno-Comp runs a full fabrication facility on site, inside nearly 10,000 sq ft under roof in the Scottsdale Airpark. Exhaust systems, intercooler piping and one-off parts get built a few steps from the dyno that verifies them. This post covers what the fab shop builds, why the materials and methods matter, and how fabrication ties into tuning. For the full service overview, see our custom fabrication page.
Built in-house, not sent out
Plenty of shops install parts. Fewer can make them. Our dedicated fab facility handles custom metalwork under the same roof as the tuning bay. The shop's standing offer is simple: if it can be made from metal, the fab team can build it.
Keeping fabrication in-house matters for three reasons:
- The fabricator, the tuner and the car are in one building
- Fitment problems get solved on the car, not over the phone
- A change in hardware can be tuned and tested the same day
Custom exhaust systems
The exhaust is often the first fabrication job on a performance build. It affects flow, sound and how the engine responds to a tune.
Why TIG-welded, mandrel-bent stainless
Our custom exhausts are TIG-welded, mandrel-bent stainless steel. Each choice solves a specific problem.
- Mandrel bending holds full tube diameter through every bend. Crush-bent tubing narrows at each bend and restricts flow.
- TIG welding gives precise heat control and clean, consistent welds on stainless.
- Stainless steel resists heat and corrosion far longer than mild steel.
Tuned for sound and flow
Every exhaust starts with the goal. Some owners want a deep, aggressive note. Others want a quieter cruise with full flow at wide-open throttle. Pipe diameter, routing and muffler choice all follow from that goal.
When an off-the-shelf system fits the goal, we also install systems from MagnaFlow, Borla and Akrapovič. Headers from Kooks and American Racing are available for applications that need them. Custom fabrication takes over where the catalog runs out.
Aluminum intercooler piping for forced induction
Turbo and supercharged builds put new demands on the intake tract. Charge piping often has to route around non-stock parts, tight engine bays or a larger intercooler. The fab shop builds custom aluminum intercooler piping for these builds. It is also the fix when a project is half-finished and the piping is the missing piece.
Piping that seals and holds its shape under boost lets the tuner hold the target psi. It also keeps the boost signal stable for the ECU. Forced induction work pairs naturally with supercharger kit installation and turbo upgrades, including systems from Magnacharger, Whipple and ProCharger. See our supercharger and turbo installs page for more on that side of the shop.
Every change is verified on the dyno
Fabrication changes airflow, and airflow changes the tune. That is why our fab work and our dyno sit in the same building.
- AWD dyno with 8.5-inch double rollers under each tire, rated to 2,000 whp
- Load-bearing design that replicates the car's acceleration rate in any gear at any RPM
- Enclosed, temperature-controlled dyno room with a 60+ mph high-speed fan
- Consistent pulls year-round, including the summer months
Before-and-after pulls show measured whp and wtq, so you can see what the new hardware delivered. Read more on our dyno tuning page.
Tuning the new hardware
New exhaust or intercooler piping often needs a matching calibration. Dyno-Comp is a COBB Gold certified pro tuning facility and an authorized SCT and Diablo Sport pro tuning facility. The calibration is written on the dyno against the hardware actually on the car.
What to bring to a fabrication consult
A productive first conversation starts with a few details:
- Year, make, model and engine
- Current modifications and any parts you already own
- Your goal, whether that is a sound target, a whp target or a boost target in psi
- How the car is used, whether street, track or both
With that information, we can scope the job and tell you what is custom, what is off the shelf, and what the tune will need.
Why Dyno-Comp for fabrication
- Performance shop in the Scottsdale Airpark since 2002
- Full on-site fabrication facility in nearly 10,000 sq ft under roof
- Stainless exhausts and aluminum intercooler piping built in-house
- AWD dyno rated to 2,000 whp for verification
Start your build
If your project needs a custom exhaust, intercooler piping or a part nobody sells, the fab shop is the place to start. Book a dyno session or a fabrication consult, or call (480) 596-0500 to talk through the build.